استارتر موتور دستی AEG

/0 دیدگاه /در , /توسط

Surion - Manual motor starter

استارتر موتور دستی AEG

Surion, a complete range of compact and reliable manual motor starters rated from 0,1A to 63A in two different frame sizes (45 and 55mm width).

It represents a new motor protection system for switching and protecting three phase induction motors up to 30kW at 400V AC with current ratings up to 63A.

Features and benefits

  • Rocker and rotary handle operator
  • Thermal and magnetic protection
  • Standard and high breaking capacity
  • Icu = 100kA G Ics = 100% Icu
  • Icu < 100kA G Ics min. 75% Icu
  • Clear identification of the operation state (ON-OFF-tripped)
  • Ambient temperature compensation
  • Phase failure protection

Specifications

 

GPS2B

GPS1B

Thermal and magnetic protection
۱۰-۶۳ ۰٫۱-۳۲ Rated current In (A)
۱۰-۶۳ ۰٫۱-۳۲ Rated operational current Ie (A)
۴-۳۰ ۰٫۱-۳۲ Rated power at 400Vac (kW)
Utilisation category
A A IEC 60947-2 (circuit breaker)
AC-3 AC-3 IEC 60947-4-1 (MMS)
۱۰ ۱۰ Tripping class IEC 60947-4-1
x13 x13 Magnetic release Ie max. (A)
۱۰۰,۰۰۰ ۵۰,۰۰۰/۲۵,۰۰۰ Mechanical/electrical endurance

رله کنترل موتور هوشمند AEG

/0 دیدگاه /در , /توسط

EntelliPro: Intelligent motor management relay

رله مدیریت موتور هوشمند AEG

Motor protection and motor control with pre-programmed motor typicals. Status/Maintenance/Management information through communications.

In addition the system offers the possibility to obtain a readout of the status of the motors and gear apparatus as well as maintenance information.

In addition it offers the user user-friendly options to manage settings and configurations.

New features of the system

  • Communications redundancy due to availability of the Modbus RTU and Profibus DP communications lines
  • User-friendly touchscreen windows offer motor control directly from the panel or combined operation of up to 32 motors by means of a clear colour touchscreen
  • Predefined control logic with which the desired drive configuration can be selected easily and quickly
  • A logbook of analogue values and events with real-time timestamps
  • ۲۴V DC or 100 to 240 V AC power supply

The system is ATEX and SIL-certified, which makes it possible to be utilised in the most demanding environments, such as petrochemical installations, oil rigs and power plants.

Motor management system for protection and diagnostics

ES3

  • I/O 7 digital inputs, 3 digital outputs

ES5

  • I/O 16 digital inputs, 8 digital outputs
  • ۴-۲۰mA output

System functionality

  • Motor protection
  • Motor control
  • Interface with process control and SCADA system
  • Status information from motors and switchgear
  • Maintenance information
  • Management of settings and configuration

New features

  • Predefined control logic
  • Communication redundancy
  • SIL certified
  • Analogue value logging
  • Event logging with time stamp
  • Configurable Profibus-DP data block
  • ۱۱۰ to 240 V AC supply voltage
  • Demonstration kit

Motor drive applications

  • Drive typicals
  • Direct-on-line (DOL)
  • Reverse
  • Star delta
  • Star delta reverse
  • Softstarter
  • Softstarter reverse
  • Breaker control
  • Dahlander
  • Pole changing starter
  • Solenoid valve
  • Actuator

Typical control logic

The control logic coordinates the commands from four different control units

رله اضافه بار الکترونیک AEG سری RE

/0 دیدگاه /در , /توسط

Series RE - Electronic overload relay

رله اضافه بار الکترونیک AEG سری RE

Electronic overload relays have been designed primarily to protect electric motors and associated electrical circuits.

These devices operate on the principle of monitoring the current in a motor starter circuit which, when the current exceeds a pre set condition, or there is a loss of current in any phase, the device will initiate a trip circuit which in turn causes the power to the starter (contactor) to be disconnected thus making the circuit safe.

Features

  • Low power consumption
  • Great accuracy
  • Full reliability
  • Phase unbalance protection
  • Interchangeable with thermal overload relay
  • Multiple trip class selection
  • Manual / Auto reset

Main characteristics

  • Setting range from 0.1 up to 150A
  • Self powered
  • Thermal memory
  • Phase loss protection
  • Phase unbalance protection
  • Direct fitting to contactors Series CL
  • Interchangeable with thermal overload relay
  • Multiple ttrip class selection
  • Manual / Auto reset
  • Increased flexibility, less order codes, less stock
  • Tripp class: 5 – 10 – 20 – 30

رله اضافه بار حرارتی (بیمتال) AEG و RT جنرال

/0 دیدگاه /در , /توسط

Series RT - Thermal overload relays

رله های اضافه بار حرارتی AEG سری RT

Thermal overload relays for contactors series CL and CK from 0.16 to 850A

Class 10A, 10, 20, 30
آاگ بیمتال

Features and benefits

  • Control circuit up to 690V AC
  • Power circuit:
    – RT1, RT12: up to 690V
    – RT2, RT22, RT3, RT32, RT4/4L, RT5/5L & RT6/6L: up to 1000V
  • Thermal protection against normal overloads
  • Three pole differential (phase unbalance protection)
  • Protection against long starting times
  • Automatic ambient temperature compensation between -25ºC + 60ºC
  • Front mounted test button
  • Trip indication
  • Independent auxiliary contacts with double rupture (1NO + 1NC)
  • Function selector:
    – Manual RESET
    – Manual RESET and STOP
    – Automatic RESET with STOP
    – Automatic RESET without STOP

رله اضافه بار حرارتی (بیمتال) AEG و MTO جنرال

/0 دیدگاه /در , /توسط

Series MTO - Thermal overload relays

رله های اضافه بار حرارتی AEG سری MTO

Thermal overload relays for M Series contactors from 0.11 to 14A.

Features and benefits

  • Control circuit up to 690V
  • Power circuit up to 690V
  • Three-pole differential (phase unbalance protection)
  • Automatic ambient temperature compensation between –۲۵°C and +60°C
  • Choice of manual or automatic reset
  • Direct connection to contactor or independent mounting using accessories.
  • Screw and Ring terminal versions
  • Terminals protected against accidental contact in accordance with VDE 0106 T.100 and VBG4
  • Terminal numbering in accordance with EN ۵۰۰۰۵
  • Degree of protection IP20 (EN 60529)
  • Additional auxiliary contact block 1NO (with manual reset only)

Characteristics

  • Thermal protection against balanced overload.
  • Three-pole differential (phase unbalance protection).
  • Automatic ambient temperature compensation.
  • Front mounted selector for choosing utilisation current.
  • Reset button, 2 positions: Manual(H) and Automatic(A) by turning the blue selector.
  • Stop push-button, independent of reset (red).
  • Manual trip lever (tripping test).
  • Tripping indicator (0-1).
  • To facilitate wiring arrangements terminal 96 fits directly onto coil terminal (A2) and terminal 14/22 fits directly onto the feedback auxiliary contact

کانتاکتور مخصوص سوئیچ خازن AEG و CSCN جنرال

/0 دیدگاه /در , /توسط

Series CSCN - Contactors designed for capacitor switching application

کانتاکتور طراحی شده برای خازن برنامه سوئیچینگ AEG سری CSCN

Energy management applications

With built-in resistance to switch three phase capacitor banks

“CSCN” contactors incorporate a front block with three early-make auxiliary contacts together with 6 quick discharge resistors (two per phase) through which the capacitors are switched to the network, reducing the current peak. Once the resistors have damped the current peak, the main contacts short-circuit the resistors, carrying the uninterrupted current. A few miliseconds later the early-make auxiliary contact closes to guarantee that all current flows through the main contacts.

  • Safe – new visual status indicator
  • Easy – clear access to terminals
  • Fast – pre-fixed resistor wiring
  • Compact – 5mm height reduction
  • High performance – upto 100.000 cycles

کنتاکتور راندمان بالا AEG و CK جنرال

/0 دیدگاه /در , /توسط

Series CK - High efficiency contactors - 825A and 1250A

کنتاکتور راندمان بالا AEG سری CK

Three and four poles contactors with  electronic module: ۱۵۰ to 780A (AC3) – 200 to 1250A (AC1)

The focus of GE Industrial Solutions’ engineers when upgrading the electronic module for CK was Reliability and Simplification. They collected all field experience of the successful CK contactor range to keep improving specifications and performance in the most demanding applications for contactors.

Cover a greater range with with less references, with only 4 coils the new electronic module covers a range from 24V -30% up to 500V +10% (AC 50/60Hz and DC).

The 4 new coils cover the same range that was previously done with 20.

This means a reduction in stock, easier management of inventory for distributors and better service which will ensure increased availability to the end customer.

The electronic module has been designed to support customer request to perform successfully in the most difficult applications.

۲۴-۶۰V
(AC 50/60Hz and DC):
With special reinforce of the lower range (-30%) solving typical application issues when using big contactors with 24V supply.

۴۸-۱۳۰V
(AC 50/60Hz and DC):
Covers the most common voltages used in transportation segment with only one contactor.

۱۰۰-۲۵۰V
(AC 50/60Hz and DC):
This range replaces the most popular automation voltages; 110-120VAC, 125VDC (MV application) and 220-240VAC. Allowing OEM, Distributors and PB to optimize their stocks and service end customer.

۲۵۰-۵۰۰V
(AC 50/60Hz and DC):
Typical voltage for Power Switching application. This contactor helps OEM in UPS, Data Centers and Power Quality application to standardize their machines to be sold WorldWide.

Benefits

The new electronic module redesign from GE provides much better reliability versus any previous electronic modules or pure mechanical systems.

This will help customer to reduce production shortages and maintenance downtimes to a minimum.

This new range will be the preferred solution for Original Equipment Manufacturers because they can standardize the Bill Of Materials of their machines to be used worldwide.

CK contactor series with electronic module is the perfect fit for OEM’s working on Renewals (Wind, Solar, ATS, UPS), HVAC, Marine, Medium Voltage, Oil & Gas and Transportation

CK is approved UL, CCC and CE.

  • Increases mechanical life of the contactor improving reliability of end customer equipment.
  • Suitable for weak networks application by including a protecting voltage software to avoidhattering and contactor coil burning
  • Better performance in high vibration application; wind, marine, transportation
  • Increased contact pressure reduces resistance per phase and thermal load
  • Noise reduction even in hard environments with dust and corrosion
  • Transient voltage suppressor built-in
  • Wider temperature range operation: -40º to +70ºC
  • Application up to 3000m without derating
  • Conversion kit for installed CK base with electronic module
  • No dimensions change to facilitate exchange of products
  • Energy efficiency: reduce on hold consumption
  • Compliant with REACH and RoHS directive

کنتاکتور چند منظوره AEG و CL جنرال

/0 دیدگاه /در , /توسط

Series CL - Contactor series for General Purpose application

کانتاکتور برای استفاده همه منظوره AEG سری CL

Three and four pole contactors

– ۹ to 105A (AC3)

– ۲۵ to 140A (AC1)

Control circuit

  • Alternating current up to 690V
  • Direct current up to 440V
  • Terminal numbering in accordance with EN 50005 and EN 50012
  • Fixing by clipping onto 35mm DIN rail EN 50022-35 or by screws
  • Screws protected against accidental contact in accordance with VDE 0106 T.100, VBG4

Ring terminal version

  • Three coil terminals
  • Mounting possibilities:
    – front/side instantaneous auxiliary contact blocks
    – timed auxiliary contact blocks
    – mechanical latch
    – transient suppressor block and interface modules
  • Degree of protection:
    – IP20 to CL00 … CL02
    – IP10 to CL25 … CL10
  • Maximum number of auxiliary contacts:
    – ۴ for CL00 … CL25
    – ۶ for CL04 … CL45
    – ۸ for CL06 … CL10

کامپکت کنتاکتور جنرال GE

/0 دیدگاه /در , /توسط

Series M - Compact contactor series up to 12A

کامپکت کانتاکتور AEG سری M

Three and four pole contactors

– ۹ and 12A (AC3)

– ۲۰A (AC1)

Features and benefits

Control circuit:
  • Alternating current up to 600V
  • Direct current up to 440V
  • Terminal numbering in accordance with EN 50012
  • Fixing by clipping onto 35 mm DIN rail (EN 50022-35) or by screws
  • Screws and fast-on terminals protected against accidental contact in accordance with VDE 0106 T.100 and VBG4
  • Versions: Ring terminal and printed circuit terminals
  • Facility to mount instant and timed auxiliary contact blocks and voltage suppressor block
  • Degree of protection IP20 (EN 60529).
  • Maximum number of auxiliary contacts to be added: 6